HEIDENHAIN TNC 640 (34059x-02) - Manual (Page 629)

Overview tables 19.4
19
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
629
M Effect Effective at block... Start End Page
M101
M102
Automatic tool change with replacement tool if maximum tool life has
expired
Reset M101
■
■
175
M107
M108
Suppress error message for replacement tools with oversize
Reset M107
■
■
175
M109
M110
M111
Constant contouring speed at cutting edge (feed rate increase and
reduction)
Constant contouring speed at cutting edge (only feed rate reduction)
Reset M109/M110
■
■
■
357
M116
M117
Feed rate in mm/min on rotary axes
Reset M116
■
■
434
M118 Superimpose handwheel positioning during program run
■
360
M120 Pre-calculate the radius-compensated contour (LOOK AHEAD)
■
358
M126
M127
Shorter-path traverse of rotary axes:
Reset M126
■
■
435
M128
M129
Maintaining the position of the tool tip when positioning with tilted axes
(TCPM)
Reset M128
■
■
437
M130 Within the positioning block: Points are referenced to the untilted
coordinate system
■
352
M138 Selection of tilted axes
■
440
M140 Retraction from the contour in the tool-axis direction
■
362
M143 Delete basic rotation
■
364
M144
M145
Compensating the machine’s kinematic configuration for ACTUAL/
NOMINAL positions at end of block
Reset M144
■
■
441
M141 Suppress touch probe monitoring
■
363
M148
M149
Automatically retract tool from the contour at an NC stop
Reset M148
■
■
365