HEIDENHAIN TNC 640 (34059x-02) - Manual (Page 614)

Tables and overviews
19.1 Machine-specific user parameters
19
614
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
Parameter settings
Geometry filter for filtering out linear elements
Type of stretch filter
- Off: No filter active
- ShortCut: Leave out single points on polygon
- Average: The geometry filter smoothes corners
Maximum distance of filtered to unfiltered contour
0 to 10 [mm]: Filtered points are within this tolerance to the resulting line
Maximum length of the line resulting from filtering
0 to 1000 [mm]: Length over which geometry filtering is effective
Settings for the NC editor
Create backup data
TRUE: Create backup file after editing NC programs
FALSE: Do not create backup file after editing NC programs
Behavior of cursor after deletion of lines
TRUE: Cursor on previous line after deletion (iTNC behavior)
FALSE: Cursor on next line after deletion
Behavior of cursor with first or last line
TRUE: All-round cursors permitted at PGM start/end
FALSE: All-round cursors not permitted at PGM start/end
Line break with multi-line sentences
ALL: Always display lines completely
ACT: Only completely display lines of the active sentence
NO: Only display lines completely when the sentence is edited
Activate help
TRUE: Always display help graphics during input
FALSE: Only display help graphics when the CYCLE HELP soft key is set to ON. The CYCLE
HELP OFF/ON soft key is displayed in Program operating mode after pressing the "Screen
layout" button
Behavior of soft key row following a cycle input
TRUE: Leave cycle soft key row active after a cycle definition
FALSE: Hide cycle soft key row after a cycle definition
Delete confirmation request with Block
TRUE: Display confirmation request when deleting an NC block
FALSE: Do not display confirmation request when deleting an NC block
Line number up to which testing of the NC program is implemented