HEIDENHAIN TNC 640 (34059x-02) - Manual (Page 621)

Technical Information 19.3
19
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
621
User functions
■
Magnification of details
Programming graphics
■
In the Programming mode, the contour of the NC blocks is drawn on
screen while they are being entered (2-D pencil-trace graphics), even
while another program is running
Program Run graphics
Display modes
■
Graphic simulation of real-time machining in plan view / projection in 3
planes / 3-D view
Machining time
■
Calculating the machining time in the Test Run mode of operation
■
Display of the current machining time in the Program Run operating
modes
Returning to the contour
■
Mid-program startup in any block in the program, returning the tool to
the calculated nominal position to continue machining
■
Program interruption, contour departure and return
Datum tables
■
Multiple datum tables, for storing workpiece-related datums
■
Calibrate the touch probe
■
Compensation of workpiece misalignment, manual or automatic
■
Datum setting, manual or automatic
■
Automatic workpiece measurement
■
Cycles for automatic tool measurement
Touch probe cycles
■
Cycles for automatic tool measurement
■
Cycles for automatic kinematics measurement