HEIDENHAIN TNC 640 (34059x-02) - Manual (Page 168)

Programming: Tools
5.2 Tool data
5
168
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
Exiting the tool table
Call the file manager and select a file of a different type, such as
a part program
Tool table for turning tools
With the management of turning tools, other geometric
descriptions are considered than with milling or drilling tools. To be
able to execute tool radius compensation, for example, you have
to define the tool radius. To support these definitions, the TNC
provides a special tool management for turning tools, See "Tool
data", page 467.