beautypg.com

HEIDENHAIN TNC 640 (34059x-02) User Manual

Page 475

background image

Basis Functions (Software Option 50) 14.2

14

TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013

475

Programming undercutting

Undercutting is usually required for the flush connection of
counterparts. In addition undercutting can help to reduce the
notch effect at corners. Threads and fits are often machined with
an undercut. You have various contour elements for defining the
different undercuts:

UDC TYPE_E: Undercut for cylindrical surface to be further
processed in compliance with DIN 509
UDC TYPE_F: Undercut for plan and cylindrical surface for
further processing in compliance with DIN 509
UDC TYPE_H: Undercut for more rounded transition in
compliance with DIN 509
UDC TYPE_K: Undercut in face and cylindrical surface
UDC TYPE_U: Undercut in cylindrical surface
UDC THREAD: Thread undercut in compliance with DIN 76

The TNC always interprets undercuts as form
elements in the longitudinal direction. No undercuts
are possible in the plane direction.