Grass Valley CRSC v.3.2 - Manual (Page 94)

82
Router Crosspoints Page
Page Basics
How to Perform a Diagonal Take in the Graphic View
1 Either click the ‘Diagonal Take’ button at the bottom of the page or right-click the crosspoint
view and choose the ‘Diagonal Take . . .’ command from the context menu that appears.
2 The ‘Diagonal Take’ dialog appears.
3 Enter a range of outputs In the ‘Output’ section. The range of valid destinations appears at
the right. Enter a starting number in the left-hand field and an ending number in the right-
hand field. All outputs in that range are selected.
4 (Optional) Check the Reverse check box to perform a reverse diagonal take.
5 Enter a starting input number in the ‘Input’ section. If you checked ‘Reverse’, the number you
enter must be the highest input number of the range that will be generated. Otherwise, the
number you enter must be the lowest input in the range.
A diagonal take counts inputs upward from the starting point. A reverse diagonal take
counts inputs downward from the starting point.
This illustration show a reverse diagonal take of inputs 1–12 to outputs 1–12.