Grass Valley CRSC v.3.2 - Manual (Page 93)

81
CRSC
User’s Guide
6 Enter a starting input number in the ‘Input’ section. If you checked ‘Reverse’, the number you
enter must be the highest input number of the range that will be generated. Otherwise, the
number you enter must be the lowest input in the range.
A diagonal take counts inputs upward from the starting point.
A reverse diagonal take counts inputs downward from the starting point.
7 Click Execute. The take is performed. Click Cancel to leave the dialog without performing
any takes.
8 CRSC shows the status of the affected entries in the ‘Status’ column. (If an output is locked,
the status will be “Destination Locked” and the take to that output will not occur.)