Grass Valley CRSC v.3.2 - Manual (Page 87)

75
CRSC
User’s Guide
If you hover your mouse over a square, a help message appears:
This message tells you the connection you will make if you click the square.
(The message also tells you that you can right-click the crosspoint matrix to obtain a context
menu that has 7 additional commands. See
Context Menu , following.
Note: to undo the most recent take, click Undo Last Take at the bottom of the page.
Table View
You can perform simple takes in the table view of the crosspoints by entering a new port
number in the input field of a row that corresponds to the desired output. The status field of that
row indicates whether the take succeeded.
(There are some exceptions to this and variations of this. When an output is locked, a take does
to that output not occur. The display and router behavior is different when the router is AES
stereo (except for the CR6464-AES). The display and router behavior is different when the router
is a machine control router.)
(You can right-click the crosspoint table to obtain a context menu that has 7 additional
commands. See
Context Menu , next.
Context Menu
The context menu (obtained by right-clicking within the graphic view or table view has a set of 7
commands:
The following describes the context menu commands:
Menu Option Icon Description
Copy Copies either selected rows or the entire crosspoint matrix to the Windows
clipboard.
See Copying and Pasting Crosspoint Data , following.
Paste Initiates a dialog in which you can paste the clipboard contents (which
must be a valid set of outputs and inputs) into the current crosspoint view.
Doing this affects the router as well as the ‘View Router Crosspoints’ page.
See Copying and Pasting Crosspoint Data , following.