Grass Valley CRSC v.3.2 - Manual (Page 113)

101
CRSC
User’s Guide
To change the ordering of the table, click any column header once for ascending order; click the
column header again for descending order. The entire table will re-display ordered according to
the data in the column you select.
How to Release Selected Locks
1 Go to the ‘Lock Maintenance’ page.
2 Click the ‘Select’ check box on the rows listing that locks you want to release.
Or, to release all locks, click Select All.
To deselect locks, clear the ‘Select’ check box for the lock or click Select None.
3 Click the Unlock Selected . . . button.
After they are unlocked, locks cannot be reapplied through CRSC. Locks are applied at a control
panel only.
Locked By Panel Lists one of three values:
1) the IP address of the panel that locked the output.
2) ‘Self’ if the output was locked using a control panel attached to the router.
3) ‘Serial’ if the output was locked by a control system operating over a serial
connection.
Panel Online Indicates, by a check mark, whether the panel that locked an output is con-
nected on the CRSC network.
Column Description