Grass Valley CRSC v.3.2 - Manual (Page 49)

37
Machine Control Routers Page
Summary
Click the ‘Setup Machine Control Router’ entry in the navigation pane to access the machine
control routers page:
The page has two regions. Above is a table in which you can configure each port of a machine
control router.
Below is a ‘Network Frame Summary’. You can select a machine control router in its ‘Machine
Control Routers’ tab by clicking the radio button in the row for that machine control router. If
your system has no machine control routers, this table will be empty.
Click ‘Refresh Summary’ at any time to be sure that you are viewing the most current
information.