Grass Valley CRSC v.3.2 - Manual (Page 161)

149
CRSC
User’s Guide
3 Press source S.
Pressing another destination button (always) starts a new take.
In enhanced mode, a normal take occurs on all the levels defined for the destination.
Breakaway Takes
A breakaway takes multiple sources, on different levels, to a destination. Breakaway takes can be
performed on all control panels except CQX panels.
To perform a breakaway, first press a destination button. Then alternately press level buttons
(one or more) and then a source button and then repeat for other levels. The multiple takes
occurs immediately when you press the source buttons. The previous route (for that destina-
tion) is lost.
Please note:
• Takes on CP3201s and CP6401s are different. See Single-Destination Takes on page 152.
• If a destination is locked, the destination button is usually red, high-tally when selected. You
cannot perform a take for a destination that is locked. See
Performing Locks on page 156.
• The meaning of a take for a machine control router is different from takes on other routers.
See
Machine Control Takes on page 155.
Example — Breakaway in Standard Mode
You want to take SD video from source 1 to destination 2. But you also want to take AES12 from
source 3 and both AES34 and AES56 from source 4.
(Assume that these sources and destinations are enabled and remain enabled.)
The level buttons are SD, A12, A34, and A56.
1 Press destination 2. The previous source was source 7 so it is high-tally.
2 Select level SD (only). Press source 1.
3 Select level A12 only. Press source 3.
Source
Dest
1 2 3 4 5 6 7 8 9
D
S
Source
Dest
1 2 3 4 5 6 7
S3 S1 S4 S7
D2 A56 A34 A12 SD
Source
Dest
1 2 3 4 5 6 7
S3 S1 S4 S7
D2 A56 A34 A12 SD
Source
Dest
1 2 3 4 5 6 7
S3 S1 S4 S7
D2 A56 A34 A12 SD