Grass Valley CRSC v.3.2 - Manual (Page 53)

41
CRSC
User’s Guide
You can click the upper left corner of the crosspoint matrix (above and to the left of column 1,
row 1) to force a “diagonal” take for the router. This places all the ports into tristate and they all
appear on the diagonal of the displayed matrix.
Using the Machine Control Router Page
The ‘Machine Control Port Settings’ table displays all port types for the machine control router
you select in the ‘Machine Control Routers’ table at the bottom of the page.
To change the port type, click an entry in the ‘Port Type’ column and select type from the drop-
down list:
Fig. 5-2: Machine Control Port Specification
The ‘Machine Control Port Settings’ section displays the following:
Column Description
Port Number Port number of a port on the machine control router. Because machine
control ports are bidirectional, these numbers represent both inputs and
outputs.
Port Type Port type assigned to the port. There are five port types. (See Machine
Control Port Types on page 38.) Port types are selected from the drop-
down list.