Grass Valley CRSC v.3.2 - Manual (Page 74)

62
Remote Panels Page
Using the Remote Panels Page
9 If you leave the remote panels page before you have saved your remote panel configuration,
CRSC will give you a warning:
How to Change a Button Function
1 Go to the ‘Program Remote Panels’ page.
2 In the ‘Remote Panels’ tab at the bottom of the page, click the radio button in the ‘Edit/
Update’ field of the remote panel module for which you want to create a new configuration.
3 In the panel graphic at the top of the page, click on the button you want to change.
a From the ‘Button Function’ drop-down list, select a function — if you want to change the
function type.
b Fill each field as needed for the type of button. The fields vary with the button function:
• Destination Selection Buttons
• Level Buttons
• Salvo Buttons
• Source Selection Buttons
• Paging Buttons
• Unused Button Type
c In the ‘Device Name/Button Label’ field, enter a mnemonic for the button and press
‹enter› on your keyboard. The mnemonic you enter appears in the panel graphic at the
top of the page (only).
4 When you have finished defining button functions, click Update Panel to write the button
configuration to the remote panel.
5 Important! Click Save to File to save the configuration in your PC’s file system. The extension
for panel configuration files is .pfg .
How to Change the Panel Mode
1 Go to the ‘Program Remote Panels’ page.
2 In the ‘Remote Panels’ tab at the bottom of the page, click the radio button in the ‘Edit/
Update’ field of the remote panel module for which you want to create a new configuration.
3 In the ‘Panel Mode’ field, select a mode of operation from the drop-down list:
‘Standard’,
‘Enhanced — Hold’,
‘Enhanced — No Hold’.
For a description of each mode, see Remote Panel Modes on page 47.