Grass Valley CRSC v.3.2 - Manual (Page 70)

58
Remote Panels Page
Using the Remote Panels Page
The ‘Display Page 1’ button causes the panel to present
Segments 1 and 3 Functions 1–32 On the top 32 buttons
Functions 65–96 On the bottom 32 buttons
and the ‘Display Page 2’ button causes the panel to present
Segments 2 and 4 Functions 33–64 On the top 32 buttons
Functions 97–128 On the bottom 32 buttons
The ‘Display Sources’ button causes the panel to present
Segments 1 and 2 Functions 1–64 On the 64 buttons
and the ‘Display Destinations’ button causes the panel to present
Segments 3 and 4 Functions 65–128 On the 64 buttons
The default button mnemonics for the ‘Display Sources’ and ‘Display Destinations’ buttons are
‘SHOW SRC’ and ‘SHOW DST’.
When you click on any paging button in the configuration page, CRSC changes the graphic to
display the button page represented by the paging button you clicked.
The terms ‘Display Sources’ and ‘Display Destinations’ denote that destination buttons are not
permitted on the page of source buttons and source buttons are not permitted on the page of
destination buttons. (The ‘Display Page 1’ and ‘Display Page 2’ buttons do not have this
restriction.)
If, while you are editing a CP6464, you click ‘Show SRC’ and the source page is visible and
attempt to change a source button to a destination button, CRSC gives an error message:
Level buttons and salvo buttons are permitted anywhere.
(The mnemonics apply only in the ‘Remote Panels’ page. Actual panels require you to fabricate
appropriate clear plastic button legends if their buttons are to have legends.)
Paging Button Types
CRSC’s ‘Remote Panels’ page calls these “panel type” buttons. These are the button types:
• Display Page 1
This button causes functions 1–32 and 65–96 to appear on the 64-button array.