Grass Valley CRSC v.3.2 - Manual (Page 57)

45
CRSC
User’s Guide
Levels
These are the fields of the ‘Levels’ table in the ‘Network Frame Summary’:
All CR Frames
These are the fields of the ‘All CR Frames’ table in the ‘Network Frame Summary’:
Configuration Options
Five of the six buttons at the bottom of the page are configuration options:
• New
Click this button to create a new configuration for the selected remote panel module.
This is an effective way (and the only way) to change the panel type assigned to a remote
panel module.
• Read Panel
Click this button to upload the configuration from the selected remote panel module.
Identify CP When you click Identify CP, the remote panel listed on that row identifies itself by dis-
playing a moving pattern of button lights.
This feature is helpful if you forget which panel of possibly many is represented by the
particular IP address.
The moving button lights continue indefinitely. To turn off the pattern, click any button
on the panel or click Identify CP again.
Column Description
Level The level name and number.
Router The router to which the level is assigned.
Frame Type The type (model number) of router.
Router IP The IP address assigned to the router.
Physical Inputs The physical input and output ranges of the routers.
Physical Outputs
Controller Sources The “logical” input and output ranges of the router —as they might be identified
on a remote panel.
Controller Dest
Column Description
Name Name assigned to the CR Series device.
Frame Type Type (model number) of CR Series device.
Panel Type Type (model number) of control panel associated with a remote panel module. The
field is blank if the device is not a remote panel module.
Subnet Mask Subnet mask currently assigned to the device.
Column Description