Grass Valley CRSC v.3.2 - Manual (Page 149)

137
CRSC
User’s Guide
In a CRSC network, all buttons except the lock buttons (shown) are configurable. In an NV9000
system, all buttons are configurable, including the lock buttons.
You can mount a 1RU panel on any 1RU router or remote panel module.
The CP3201 is a 1RU panel that resembles the CP1616, but it has 32 source buttons (in 2 rows of
16) and no destination buttons. The CP3201 cannot be used as a captive panel. Its design
requires a CRSC or NV9000 network.
CQX Panel
The CP1602-CQX is also a 1RU control panel that has 38 buttons:
Fig. A-28: Front view of the CP1602-CQX Control Panel
The CP1602-CQX control panel has 16 source buttons, 2 CQX destination buttons, 6 auxiliary
destination buttons, 4 transition type buttons, 3 transition rate buttons, and 7 function buttons.
Of the function buttons, 5 are presently disabled, reserved for future use, and two are active. The
active buttons are ‘Destination Lock’ and ‘Panel Lock’.
2RU Panels
The CP3232 control panel has 76 buttons:
Fig. A-29: Front view of the CP3232 Control Panel
The CP6464 control panel also has 76 buttons, but the panel is slightly different and used exclu-
sively with CR6400 family routers:
Fig. A-30: Front view of the CP6464 Control Panel
The CP3204 control panel resembles the CP3232, but it has 4 buttons in the lower section on the
left, instead of 32.
Panel Lock Destination Lock
Transition Transition CQ Outputs Aux Outputs
Inputs (16)
Panel Lock Destination Lock
Level
Selection
Panel Lock Destination Lock
Level
Selection
Src, Dst
Mode