Grass Valley CRSC v.3.2 - Manual (Page 108)

96
Firmware Updates Page
Using the Page
6 When the firmware update completes, it displays a status report:
Fig. 8-2: Sample Firmware Status Report
Click Save . . . to save this report as a .txt file to archive, to print, or to review later.
Click Print to print this report on your local printer.
How to Reset Frames
It is usually not necessary to reset any frames in your system. But if you are in doubt about
whether any devices are operating correctly, you can reset the devices.
1 Go to the ‘Firmware Updates’ page.
2 Select individual compact routers or remote panel modules by checking the check box in
‘Select’ column on the row listing the device.
Or, click Select All to select all devices.
You can unselect devices by clearing their individual check boxes or by clicking Select None.
To reset a device, you must have selected at least one device in the device list.
3 Click Reset Frames. All selected compact routers and remote panel modules are reset. A
reset takes a few seconds, but it can take up to a minute for remote panel modules to deter-
mine the state of the network.
Note
If CRSC fails to update any frame, try the update again. If the frame fails repeatedly, cycle
power, restart, and try the update again. If the frame fails again, contact Grass Valley
Technical Support.