Grass Valley CRSC v.3.2 - Manual (Page 26)

14
Introduction
Setting Up Your Configuration PC
CR Series routers and panels do not start, stop, rewind, cue, or otherwise control any media. You
might need to purchase equipment that performs those tasks. You must consider how that
equipment works in conjunction with CR Series products.
For additional information, review the Sample Configuration on page 116. It illustrates design
issues that you might encounter.
Setting Up Your Configuration PC
Your configuration PC must be assigned an IP address on one or more of the subnets you intend
to use for the CRSC network.
If you have multiple subnets in your compact router system, you will probably have to add those
subnets to your PC’s network configuration. Doing this is especially important for CQX routers.
How to Configure your PC’s IP Address(es)
1 From the PC’s Start menu, choose ‘Settings > Network Connections’ or 'All Programs >
Accessories > Communications > Network Connections', whichever is available. The ‘Net-
work Connections’ dialog box appears:
Fig. 1-5: Network Connections Window