Grass Valley CRSC v.3.2 - Manual (Page 79)

67
CRSC
User’s Guide
Context Menu for Salvos
For Panels Other than CP32-6464, CP6401, or CP6464
If you right-click in the salvo table when you are configuration salvos, the salvo context menu
appears:
The context menu has 1 command: ‘Clear Table’. When you click this command, CRSC erases the
entire salvo table.
The erasure extends to all salvo buttons you have selected at the time.
For the CP32-6464, CP6401, or CP6464
If you right-click in the salvo table when you are configuration salvos, the salvo context menu
appears:
The context menu has 5 commands:
• ‘Auto Increment . . .’
If you click this command for the input column or the output column, a confirmation dialog
appears. Click ‘OK’ to fill the column with integers from 1 to 64.
If you click this command for the level column, a dialog appears in which you can specify a
starting number for the fill. CRSC populates the entire level column with consecutive inte-
gers starting from the number you supply. If your starting number would cause the “auto-
increment” to create a value out of range, CRSC will display an error message. (Level num-
bers must be in the range 1–250.)
If you populate the levels column using this command, you will have 64 levels in a system
where only 8 levels are permitted. You will then have to clear the fields that do not contain
actual levels.
CRSC will show the level name in fields for which you have actually defined levels.
• ‘Auto Increment Selected . . .’
When you click this command, a dialog, such as this one for the input column, appears in
which you can specify a starting number for the operation:
CRSC populates the range of fields you have selected, starting with the starting number you
selected.
• ‘Set Value in Column . . .’