NewTek TriCaster 8000 - Manual (Page 60)

Page | 44
FIGURE 27 (8-INPUT VERSION SHOWN)
Each input has its own small control panel, with Volume slider(s), VU meter(s), and
other important features conveniently located. At the top of each of these control
panels is a label. Roll the mouse pointer over the label to reveal a gear button at
right which, when clicked, opens the Configuration panel (Figure 28) for the input.
FIGURE 28
FIGURE 29
A source Type selector drop-down at the
top of the Configuration panel (Figure
29) lists the Connection Type options
available for the corresponding input.
Options may include Mic 1, 2 (with and
without
phantom power), Line,
AES/EBU, and SDI Embedded.
Note: TriCaster Mini omits this menu for
inputs that support HDMI audio only.
Likewise, Phantom power is not supported
by TriCaster Mini
’s analog audio inputs.
This panel holds advanced audio features as well as basic setup controls. After
connecting audio sources to the input connectors (see also Section 3.5.1), the first
thing to do is set the correct Connection Type using the drop-down menu: