NewTek TriCaster 8000 - Manual (Page 311)

Page | 295
The entry above would select the previous clip on the source connected to Net 1.
C
LIP
_ P
LAY
Delay (ms) Shortcut Value Key 1 Value 1 Key 2 Value 2
(ms) net1 or net2 clip_ play speed # position #
You can specify “speed”, “position” or both keys (the order of keys is not important).
When “position” is not specified, play begins at the current frame. The value for
position is specified in seconds, while speed is expressed as a playback rate value
(1.0 = 100%).
For example:
Delay Shortcut Value Key 1 Value 1 Key 2 Value 2
.0001 net1 clip_ play speed -.5 position 10
This entry would play a clip backwards at 50% speed from a position 10
seconds into the clip.
C
LIP
_ S
CRUB
Delay (ms) Shortcut Value Key 1 Value 1
(ms) net1 or net2 clip_ scrub distance #
This command will move the playhead backward or forward by a distance of #
seconds. For example:
Delay (ms) Shortcut Value Key 1 Value 1
.0001 net1 clip_scrub distance 5
The entry above would advance the playhead five seconds further into a clip
displayed on the source connected to Net 1.
NOTES: The software associates values with their key name, thus key can be entered in
any order. The following are valid formats for numeric entries: “+0.1”, “0.1”, “.1”, “-0.1”.