Ection, Aster – NewTek TriCaster 8000 User Manual
Page 515
Page | 499
FIGURE 413
SECTION 22.14 TRICASTER 860 CS
Normally, the 860 CS is used in a table-top configuration. Otherwise, a rabbet on all
four sides permits you to embed the base in a cutout prepared for the purpose.
FIGURE 414
At the sides, a ½” (1.2 cm) ledge is formed for this purpose. The overlap provided
front and back is narrower, about 5/16” (.31 cm).
This manual is related to the following products: