NewTek TriCaster 8000 - Manual (Page 175)

Page | 159
Proc Amp practices:
Whenever possible, it is best to
perform color adjustments at the
source or target device. For
example, it is preferable to
calibrate a camera's colors at the
camera, before sending the signal
to TriCaster. Doing so will yield
higher color precision.
TriCaster’s Proc amps are available
for occasions when no upstream
color correction is available.
Note: If Frame Sync is enabled o
r disabled for one source in a ‘Fill + Alpha’ input pair, the
Frame Sync setting for the corresponding input channel is automatically updated to
match.
8.2.4 PROC AMP
FIGURE 134
The Input Settings tab also contains
Proc Amp (processing amplifier)
settings. Input Proc Amp adjustments
are applied after LiveMatte is
processed, which can help when
composing greenscreen shots to
match a background or LiveSet.
You may also notice that changes to
Proc Amp settings affect stopped (or
frozen) sources, including live camera
feeds.
A switch at the top of the Proc Amp
control group toggles the feature
on/off. Other controls operate as
follows:
 Brightness: Adjustment range from -50 to
+50 IRE (the default being 0). As reference, the