NewTek TriCaster 8000 - Manual (Page 400)

Page | 384
J
OYSTICK
M
ODES
Generally, changes resulting from joystick operations are governed by the current
Joystick Mode. Mode selections are mutually exclusive (only one buttons is
illuminated at a time).
Also note that when the active Positioner DELEGATE is either Virtual Zoom or
Shuttle, the Joystick Mode is irrelevant, and is ignored.
POS/SCALE
 Move the joystick horizontally, vertically or diagonally (as viewed from
above) to move delegated video source(s) on its X and Y axes.
 Twist the joystick clockwise to scale delegated source(s) up, or counter-
clockwise to scale down.
Hint: When multi-delegate selections are active for the Positioner, adjustments are
generally relative to the current state for individual delegates, as opposed to
absolute.
ROT (R OTATE )
When the POSITIONER DELEGATE selection is anything other than VIRTUAL ZOOM
or SHUTTLE:
 Move the joystick horizontally (as viewed from above) to rotate delegated
sources on the Y axis.
 Move the joystick vertically to rotate delegated sources on the X axis.
 Twist the joystick clockwise/counter-clockwise to rotate delegated sources
on the Z axis.
CROP
Except when the POSITIONER DELEGATE selection is VIRTUAL ZOOM or SHUTTLE:
 Twist the joystick clockwise (as viewed from above) to crop delegated
sources inward on all 4 edges, maintaining the original aspect ratio.