NewTek TriCaster 8000 - Manual (Page 404)

Page | 388
To delegate the joystick to control a PTZ camera assigned to a specific TriCaster
input, hold down SHIFT button on the control surface and press a button in the M/E
Delegate group. (Afterward, the button corresponding to the current PTZ camera
selection will light whenever SHIFT is pressed.)
 Pan: With SHIFT depressed, tilt the joystick left-right.
 Tilt: With SHIFT depressed, tilt the joystick backward-forward.
 Zoom: With SHIFT depressed, twist the joystick clockwise or counter-
clockwise.
 Focus: When Auto is off, and with SHIFT + CTRL both pressed, twist the
joystick clockwise or counter-clockwise.
o Auto Focus toggle: With SHIFT + CTRL held down, press the joystick
button.
 Preset selection:
o Use CTRL + LIVESET SHOT (1-4); add SHIFT to the above for presets
(5-8).
 Press CTRL + LIVESET ZOOM RATE to adjust the camera’s Animation Speed.
 Hold down SHIFT and press the top joystick button to update the current
PTZ preset (position, zoom and thumbnail icon).
22.4.11 AIRSEND™ CONTROL
AirSend™ is the software API (application programming interface) providing
network A/V support in NewTek products (see Section 17.6). Various systems and
software (both native and third-party) can take advantage of AirSend to send and
receive control instructions. As one example, NewTek’s own 3Play™ instant replay
natively systems support AirSend.