NewTek TriCaster 8000 - Manual (Page 394)

Page | 378
 When all delegated layers are currently on the same transition bin 'slot', the
selection in the corresponding transition bins simply cycles left or right
synchronously.
 Otherwise (when the Transition Bin slots for multi-delegated layers are not
aligned vertically), rotating the knob moves the selection layer by layer as
the knob turns until the selected slots are aligned. From that point,
continuing to twist SELECT moves the transition selection in lock step.
The SELECT knob also acts as a push button:
 Push SELECT to toggle the Reverse setting for the BKGD transition.
 Push SHIFT + SELECT to toggle the Ping Pong switch for the BKGD transition.
R ATE
The RATE knob operates in similar fashion to SELECT. Rotate the knob to modify
the transition Rate for delegated layers. Or press the knob to cycle through the
standard Slow, Medium and Fast presets. Multi-delegate selections are handled the
same as for Select (for both twist and push operations).
F
ADE
& T
RANS
FIGURE 349
These two buttons provide a quick way to control the Transition Bin selection for
the delegated switcher layer(s). The FADE and TRANS (Transition) buttons are
mutually exclusive; selecting either one cancels the other, and only the currently
active button remains lit.
Pushing FADE offers a quick and convenient way to select the Crossfade transition.
Push the TRANS button to activate the last-used transition icons for a video layer (or
layers. For new sessions, TRANS jumps to the first transition in the bin.