NewTek TriCaster 8000 - Manual (Page 449)

Page | 433
A.1.8 INSERT/REMOVE A DRIVE FROM TRICASTER’S REMOVABLE DRIVE BAY
3. If TriCaster is running, and if applicable (not a TriCaster 410 feature) – Eject
the hard drive you wish to remove (see Section A.1.10).
4. Open TriCaster’s front panel.
5. Open the removable drive bay door.
FIGURE 393
6. Pull the hard drive currently in the drive bay (if applicable) to remove it.
7. Insert the new hard drive (‘connector end’ first)
8. Close the drive bay door.
9. Close TriCaster’s front panel.
S UPPLEMENTARY Q UESTION :
Q: What hard drives are recommended for TriCaster’s removable drive bay(s)?
A NewTek supplied storage media has been carefully tested to meet exacting
specifications, and can be expected to provide optimal performance and reliability.
Of course, you are free to purchase storage media from other sources. Keep in mind
that manufacturer specifications and reviews may highlight favorable statistics,
focusing on results from ‘typical’ (i.e., less demanding) operating environments.