Interface configuration commands, 3 interface configuration commands – Comtech EF Data CIM-300L User Manual
Page 99
![background image](https://www.manualsdir.com/files/778889/content/doc099.png)
CiM-300L IP Enabled Satellite Modem
Rev. 1
Serial Remote Control
CD/CIM300L.IOM
73
Parameter
Type
Protocol
Description
LNB Power
Command:
Response:
Status:
Response:
Where: xxx = ON or OFF.
LNB Voltage
Command:
Response:
Status:
Response:
Where: xxx = 13,18, or 24 Volts
LNB
Reference
Enable
Command:
Response:
Status:
Response:
Where: xxx = ON or OFF.
LNB Power
Monitor Low
Current
Threshold
Command:
Response:
Status:
Response:
Where: xxx = 0 to 500 in 1 mA steps
LNB Power
Monitor High
Current
Threshold
Command:
Response:
Status:
Response:
Where: xxx = 0 to 500 in 1 mA steps
5.4.3 I
NTERFACE
C
ONFIGURATION
C
OMMANDS
Parameter
Type
Protocol
Description
Interface
Transmit
Overhead
Type
Command:
Response:
Status:
Response:
Where: xxxxx = NONE*
*Note: TE: CiM-300L only
Interface
Receive
Overhead
Type
Command:
Response:
Status:
Response:
Where: xxxxx = NONE*
*Note:
CiM-300L only
External
Clock-
Reference
Frequency
Command:
Response:
Status:
Response:
Where: nnnnn.n = 8.0 to 10000.0 (external clock frequency in
kHz).