Comtech EF Data CIM-300L - Manual (Page 249)

CiM-300L IP Enabled Satellite Modem Rev. 1
SNMP CD/CIM300L.IOM
223
11.2.4.2 T
HE
IP R
OUTING
T
ABLE
The IP routing table contains an entry for each route presently known to the CiM-300L.
Table 11-8. IP Routing Table OIDs
OID Description
ipRouteDest Destination IP address of this route. An entry with a value of
0.0.0.0 is considered a default route.
ipRouteIfIndex Index value (ifIndex) which uniquely identifies the local interface
through which the next hop of this route should be reached.
ipRouteMetric1 Primary routing metric for this route. User defined routes have a
value of 1. All others “automatically” defined routes have a value
of zero.
ipRouteMetric2 Not used and its value is -1.
ipRouteMetric3 Not used and its value is -1.
ipRouteMetric4 Not used and its value is -1.
ipRouteNextHop IP address of the next hop of this route.
ipRouteType Type of route. A value of direct(3) is used when the destination is
connected to the local network. A value of indirect(4) is used when
the destination is reached by routing to a non-local network.
ipRouteProto Routing mechanism via which this route was learned. A value of
local(2) means the route was entered manually. A value of
netmgmt(3) means the route was set via a network management
protocol. A value of icmp(4) means the route was obtained via
ICMP. A value of other(1) is used for all other cases.
ipRouteAge Number of seconds since this route was last updated.
ipRouteMask Indicates the mask to be logical-ANDed with the destination
address before being compared to the value in the ipRouteDest
field. If the value of the ipRouteDest is 0.0.0.0 (a default route),
then the mask value is also 0.0.0.0.
ipRouteMetric5 Not used and its value is -1.
ipRouteInfo Not used and is set to the null-OID.