Comtech EF Data CIM-300L - Manual (Page 38)

CiM-300L IP Enabled Satellite Modem Rev. 1
Installation CD/CIM300L.IOM
12
2.2 I
NSTALLATION
The modem arrives fully assembled from the factory. After unpacking the modem, install
the modem as follows:
2.2.1 IDU I
NSTALLATION
(O
PTIONAL
)
Refer to Figure 1-1. Use mounting kit KT/6228-1.
Table 2-1. Optional: Mounting Kit , KT/6228-1 (IDU to Equipment Rack)
QTY Part Number Description
2 FP/6138-1 Bracket, Rear Support
4 HW/10-32x1/2RK Bolt, #10 Rack
2 HW/10-32X1/4 SHC Screw, Socket 10-32 x 1/4inch
Tools Required:
! Screw Driver Phillips
! SAE Allen Wrench 5/32-inch
Install the IDU rear support brackets as follows:
1 Install provided rear support bracket onto the mounting rail of the rack. Fasten with
provided bracket bolts.
2 Fasten the provided #10 socket head screws to the rear-side mounting holes on either side
of the chassis modem. Mount the modem into the equipment rack ensuring that the socket
heads engage into the slots of the rear support brackets.
Note: It may be necessary to adjust the location of the rear mounting rails of the rack.