Comtech EF Data CIM-300L - Manual (Page 171)

CiM-300L IP Enabled Satellite Modem Rev. 1
CLI & Telnet CD/CIM300L.IOM
145
9.1.2 R
OUTE
T
ABLE
C
ONFIGURATION
P
AGE
The Route Table Configuration page is activated from the Main Menu page.
The Route Table Configuration page contains the following options/fields:
Menu Options/Fields Entry Description
Route001-Route008
(The 8 currently
displayed routes) 1-8 The Route Table allows a user to define how the packets
that the CiM receives are routed. Defining an entry in this
table is similar to the using the 'route add' command of
machines that support that command. For each route, the
user must define
1. A name assigned by the user to reference the
route. The assigned name can not contain any
whitespace and must be unique.
2. The destination address of an IP packet of
interest.
Note: Entering a DestIP/SNET of 0.0.0.0 / 0 will
configure the CiM to forward all destination IPs
over the satellite to the designated Next Hop
HDLC IP address.
The number of network addresses that are governed by
the selected destination entry i.e. subnet mask.
The Next Hop IP address. This is the IP where the packet