beautypg.com

Comtech EF Data CIM-300L User Manual

Page 200

background image

CiM-300L IP Enabled Satellite Modem

Rev. 1

CLI & Telnet

CD/CIM300L.IOM

174

Menu Options/Fields

Entry Description

Multicast IP Packets routed
to Sat

Read

Only

The Multicast Packets routed to Sat counter indicates
the number of Multicast packets that were routed to the
Satellite Interface. Could be Ethernet to Sat. or Sat. to
Sat.

Multicast IP Packets routed
to Ethernet

Read

Only

Multicast Packets routed to Ethernet counter indicates
the number Multicast packets that were routed to the
Ethernet Interface. Could be Sat. to Ethernet or
Ethernet to Ethernet.

Broadcast IP Packets routed
to Sat

Read

Only

The Broadcast Packets routed to Sat counter indicates
the number of Broadcast packets that were routed to
the Satellite Interface. Could be Ethernet to Sat. or Sat.
to Sat.

Broadcast IP Packets routed
to Ethernet

Read

Only

Broadcast Packets routed to Ethernet counter indicates
the number Broadcast packets that were routed to the
Ethernet Interface. Could be Sat. to Ethernet or
Ethernet to Ethernet

Packets from Satellite

Read

Only

Packets from Satellite is the total of all the packets
destined to the Ethernet Interface and the Satellite to
Satellite routed packets.

Total IP Packets routed to
Sat

Read

Only

Total IP Packets routed to Sat is the summation of the
Unicast, Multicast and Broadcast packets routed to the
Satellite Interface.

Total IP Packets routed to
Ethernet

Read

Only

Total IP Packets routed to Ethernet is the summation of
the Unicast, Multicast and Broadcast packets routed to
the Ethernet Interface.

IGMP Packets Received

Read

Only

Number of IGMP Packets received

IP Options Packets
Recevied

Read

Only

Number of IP Options Packets received.

Dropped – total

Read

Only

The Total Packets dropped counter indicates the
number of total packets that were dropped by the CiM.

Dropped - TTL Expired

Read

Only

The packet was dropped because the Time-To-Live
value in the IP header has reached 0. This means that
the packet has exceeded it maximum allowed number
of hops without reaching its destination.

Dropped – BAD IP Header
Checksum

Read

Only

The Bad IP Header Checksum counter indicates the
total number of packets that were received by the CiM
that contained CRC errors. If received packets contain
CRC errors, then the CiM discards the packet.

Dropped – No Route

Read

Only

The destination address of the packet does not match
any of the configured routes in the CiM Route table.
The CiM has no choice but to discard the packet since
it has no idea where it should go next.