Comtech EF Data CIM-300L - Manual (Page 499)

CiM-300L IP Enabled Satellite Modem Rev. 1
Cim IP Module Checkout CD/CIM300L.IOM
473
1.1.1 T
RANSMIT AND
R
ECEIVE
IF C
ONFIGURATION
Step Description
1 Configure the transmit and receive IF parameters on CiM 1 and CiM 2 via the front panel.
Note: The IF parameters can also be set via console menu, Telnet, web interface and SNMP -
but for this exercise, it is recommended that the front panel be used.
2 Set the TxPower to minimum level.
3 Before proceeding to next step, make sure that each CiM is locked to the other CiM.
12.2.4 B
ASIC
IP C
ONFIGURATION
Step Description
1 Launch the terminal emulation program - such as HyperTerminal on Microsoft Windows.
2 Select the appropriate COM port (to which the DB-9 end of the console cable is
connected) and configure it for:
! 38,400 bps
! 8 data bits
! no parity
! 1 stop bit
! no hardware flow control
3 Press return and to bring up the Main menu.