Comtech EF Data CIM-300L - Manual (Page 194)

CiM-300L IP Enabled Satellite Modem Rev. 1
CLI & Telnet CD/CIM300L.IOM
168
9.1.5 O
PERATIONS AND
M
AINTENANCE
P
AGE
The Operations and Maintenance page is activated from the Main Menu page.
The Operations and Maintenance page contains the following options/fields:
Menu Options/Fields Entry Description
Status A Displays status information
Unit Information I Displays unit information
Boot Image B Determines which version of the CiM firmware will be
loaded upon boot-up. The possible options are:
0. Latest - boot the newest file based upon date.
1. Image1 - boot the firmware loaded into the first slot
in permanent storage
2. Image2 - boot the firmware loaded into the second
slot in permanent storage
PARAM Image C Change name to PARAM file. This is the only one
currently supported. Determines which PARAM file will
be loaded on bootup. The options are:
0. Latest - uses the newest file based on date
1. Image1 - uses the file loaded into the first slot of
permanent storage.
2. Image2 - uses the second file loaded into the second
slot of permanent storage.
3. Factory - uses the internal, hard-coded factory
default parameters.
FPGA Image F Determines which version of the CiM FPGA firmware
will be loaded upon boot-up. The possible options are:
0. Latest - boot the newest file based upon date
1. Image1 - boot the firmware loaded into the first slot