Table 11-20. encryption subgroup oids, Table 11-21. cim smtp oids, M smtp – Comtech EF Data CIM-300L User Manual
Page 261: M snmp c
CiM-300L IP Enabled Satellite Modem
Rev. 1
SNMP
CD/CIM300L.IOM
235
11.4.1.5 E
NCRYPTION
S
UBGROUP
Note: This subgroup will only be accessible in the MIB tree if the Encryption FAST feature has
been purchased and the license key has been entered through the modem’s front panel.
Otherwise, both GETS and SETS on these OIDs will return errors.
This subgroup controls the parameters for the DES feature.
Table 11-20. Encryption Subgroup OIDs
OID Description
cimTransmitEncryptEnabled Enables/disables encryption on the transmit side.
cimReceiveDecryptEnabled
Enables/disables encryption on the receive side.
cimTransmitKey1
Allows the operator to specify the value of Key1 used to
encrypt packets transmitted to the satellite.
cimTransmitKey2
Allows the operator to specify the value of Key2 used to
encrypt transmitted packets transmitted to the satellite.
cimReceiveKey1
Allows the operator to specify the value of Key1 used to
decrypt traffic being received from the Satellite Interface.
cimReceiveKey2
Allows the operator to specify the value of Key2 used to
decrypt traffic being received from the Satellite Interface.
11.4.1.6 C
I
M SMTP
The cimSmtp subsection sets up the CiM-300L to use a SMTP mail server to send a
problem report back to CiM Support. Along with the problem report, the CiM-300L
sends the equipment serial number and configuration, which is attached to the email
message. By default, the problem report is sent to
for this to work, the user is required to enter the IP address of their outgoing SMTP mail
server and the domain name for that server.
Table 11-21. CiM SMTP OIDs
OID Description
cimSmtpServerIpAddress
Specifics user’s outgoing SMTP server’s IP address.
cimSmtpDomain
Specifics the SMTP Domain of the mail server.
cimSmtpDestinationName Specifies the SMTP destination email user name.
11.4.1.7 C
I
M SNMP C
OMMUNITY
N
AMES
The CiM-300L uses community strings as a password scheme that provides
authentication before gaining access to the CiM-300L agent’s MIBs.