Comtech EF Data CIM-300L - Manual (Page 169)

CiM-300L IP Enabled Satellite Modem Rev. 1
CLI & Telnet CD/CIM300L.IOM
143
Menu Options/Fields Entry Description
RX – Enable/Disable R Toggles Enabled and Disabled
Enabled tells the CiM to receive and process packets
from the Satellite Interface.
Disabled tells the CiM to discard and not process
packets from the Satellite Interface.
Note: Rx Disable does not disable the modem.
TX – Enable/Disable N Toggles Enabled and Disabled
Enabled tells the CiM to allow routing of packets from
its Ethernet interface to its Satellite interface.
Disabled tells the CiM to not allow routing of packets
from its Ethernet interface to its Satellite interface.
Note: Tx Disable does not disable the modem.
Receive HDLC Channel
Addresses H Activates Receiver HDLC Addresses page.
Save Parameters S This option allows a user to save the current
configuration of the CiM to permanent storage. This
configuration will be restored on each successive
power cycle of the CiM.
Exit X This option allows a user to exit the current menu and
return to its parent menu.