Comtech EF Data CIM-300L - Manual (Page 63)

CiM-300L IP Enabled Satellite Modem Rev. 1
Front Panel Menus CD/CIM300L.IOM
37
DISPLAY SELECTIONS/DESCRIPTION
NOMINAL POWER
Programs the nominal power value of the
AUPC. The nominal power value can
range from -5 to -30 dBm, in 0.5 dBm
steps.
Upon entry, the current nominal power
value is displayed. Press [
↑] or [↓] to
increment or decrement the digit at the
flashing cursor. Press [ENTER] to
execute the change.
MINIMUM POWER
Programs the minimum power level of the
AUPC. The minimum power level can
range from -5 to -30 dBm, in 0.5 dBm
steps.
Upon entry, the current minimum power
level is displayed. Press [
↑] or [↓] to
increment or decrement the digit at the
flashing cursor. Press [ENTER] to
execute the change.
MAXIMUM POWER
Programs the maximum power level of
the AUPC. The maximum power level
can range from -5 to -30 dBm, in 0.5 dBm
steps.
Upon entry, the current maximum power
level is displayed. Press [
↑] or [↓] to
increment or decrement the digit at the
flashing cursor. Press [ENTER] to
execute the change.
TARGET NOISE
Programs the Eb/No target set point. The
Eb/No target set point ranges from 3.2 to
16.0 dB, in 0.1 dB steps.
Upon entry, the current Eb/No target set
point is displayed. Press [
↑] or [↓] to
increment or decrement the digit at the
flashing cursor. Press [ENTER] to
execute the change.