Comtech EF Data CIM-300L - Manual (Page 257)

CiM-300L IP Enabled Satellite Modem Rev. 1
SNMP CD/CIM300L.IOM
231
11.3 P
RIVATE
MIB I
MPLEMENTATIONS
The agent also implements two private MIBs for the CiM-300L. The CiM IP Controller
MIB (cimController) holds all the security, feature selection, and IP related parameters
and the CiM-300L modem MIB (cim300L) which contains all the modem specific
parameters.
11.4 C
I
M IP C
ONTROLLER
P
RIVATE
MIB
11.4.1 C
I
M A
DMINISTRATION
G
ROUP
This group contains system security, administration, and feature configuration
parameters.
The “cimMibVersion” OID contains the current version of the CiM IP Controller MIB.
The current version number is 3.
11.4.1.1 C
I
M N
AME
P
ASSWORD
C
ONFIG
S
UBGROUP
The Password subgroup contains the user names and passwords for three user types:
Admin User, Read/Write User, and Read Only user. Only the Admin User can do GETS
or SETS to the Security part of the MIB.
Table 11-16. CiM Name Password Config Subgroup OIDs
OID Description
cimAdminName Administrator’s user name and must be between 1 and 16
characters.
cimAdminPassword Administrator’s password and must be between 1 and 16
characters.
cimReadWriteName Read/Write operator’s user name and must be between 1 and 16
characters.
cimReadWritePassword Read/Write operator’s password and must be between 1 and 16
characters.
cimReadOnlyName Read-Only operator’s user name and must be between 1 and 16
characters.
cimReadOnlyPassword Read-Only operator’s password and must be between 1 and 16
characters.
11.4.1.2 C
I
M A
CCESS
L
ISTS
S
UBGROUP
The Access Client List allows an operator to define which remote clients can connect to a
CiM-300L when the Access List Enforcement is enabled. Each entry allows an operator
to specify an IP address and a subnet mask to define a unique class of clients that are
allowed access to the CiM-300L.