Comtech EF Data CIM-300L - Manual (Page 98)

CiM-300L IP Enabled Satellite Modem Rev. 1
Serial Remote Control CD/CIM300L.IOM
72
Parameter Type Protocol Description
Sweep
Reacquisi-tion Command:
Response:
Status:
Response: >add/SR_xxx'cr''lf']
>add/SR_xxx'cr''lf']
Where: xxx = 0 to 999 (number of seconds).
Bit Error Rate
Threshold Command:
Response:
Status:
Response: >add/BERT_xxxx'cr''lf']
>add/BERT_xxxx'cr''lf']
Where: xxxx = NONE, or 1E-n, where n = 3, 4, 5, 6, 7, or 8
(exponent of threshold).
Demodulator
Type Command:
Response:
Status:
Response: >add/DT_xxxx'cr''lf']
>add/DT_xxxx'cr''lf']
Where: xxxx = INTL (INTELSAT OPEN NETWORK), EFD
(EF DATA CLOSED NETWORK), CSC (COMSTREAM
CLOSED NETWORK), FDC (FAIRCHILD CLOSED
NETWORK).
Demodulator
DecoderType Command:
Response:
Status:
Response: >add/DDT_xxx'cr''lf']
>add/DDT_xxx'cr''lf']
Where: xxx = VIT (K-7 VITERBI ENCODER), SEQ
(SEQUENTIAL ENCODER).
Demodulator
Spectrum
Rotation Command:
Response:
Status:
Response: >add/DSR_xxx'cr''lf']
>add/DSR_xxx'cr''lf']
Where: xxx = NRM (normal spectrum), INV (inverted
spectrum).
Reed-
Solomon
Decoder
Enable Command:
Response:
Status:
Response: >add/RSDE_xxx'cr'lf']
>add/RSDE_xxx'cr'lf']
Where: xxx = ON, OFF, or CORR_OFF.
Receive BPSK
Data Ordering Command:
Response:
Status:
Response: >add/RDA_xxx'cr''lf']
>add/RDA_xxx'cr''lf']
Where: xxx = NRM (STANDARD), INV (NON-STANDARD).
Reed-
Solomon
Interleave
Value Command:
Response:
Status:
Response: >add/RRSI_xx'cr''lf']
>add/RRSI_xx'cr''lf']
Where: xx = 4, 8, or 16.
RX 8PSK 2/3
IESS-310
Operation Command:
Response:
Status:
Response: >add/R310_xxx'cr''lf']
>add/R310_xxx'cr''lf']
Where: xxx = ON or OFF.