Configuration - save – Comtech EF Data CIM-300L User Manual
Page 64
CiM-300L IP Enabled Satellite Modem
Rev. 1
Front Panel Menus
CD/CIM300L.IOM
38
DISPLAY SELECTIONS/DESCRIPTION
TRACKING RATE
Programs the maximum tracking rate of
the AUPC.
Maximum tracking rate can range from
0.5 to 6.0 dBm/minute, in 0.5 dBm/minute
steps.
Upon entry, the current maximum
tracking rate is displayed. Press [
↑] or [↓]
to increment or decrement the digit at the
flashing cursor. Press [ENTER] to
execute the change.
LOCAL CL ACTION
Programs the local carrier loss for HOLD,
NOMINAL, or MAXIMUM.
Upon entry, the status of the local carrier
loss is displayed. Press [
↑] or [↓] to make
the selection. Press [ENTER] to execute
the change.
REMOTE CL ACTION
Programs the remote carrier loss for HOLD,
NOMINAL, or MAXIMUM.
Upon entry, the status of the remote carrier
loss is displayed. Press [
↑] or [↓] to make the
selection. Press [ENTER] to execute the
change.
Configuration - Save
DISPLAY SELECTIONS/DESCRIPTION
CONFIGURATION
SAVE
CONFIGURATION #1
SAVE
The Configuration Save menu allows
programming of configuration parameters into
memory on the M&C. There are five memory
locations that may be used to store specific
configuration setups that are used frequently.
After changing the configuration parameters
to the desired settings, enter the
Configuration Save menu and select memory
location 1 through 5. Press [ENTER] to
execute the save.