Comtech EF Data CIM-300L - Manual (Page 268)

CiM-300L IP Enabled Satellite Modem Rev. 1
SNMP CD/CIM300L.IOM
242
OID Description
cimIpRouteMaxQosBandwidth Establishes a hard maximum traffic rate that can be
processed by the CiM-300L. A value of 0 for this field implies
that no maximum limit is assigned to a route. This value
should be in multiples of 8 Kbps.
Note: The “cimIpRouteDesKey” OID will only be accessible if the Encryption FAST
feature has been purchased and activated. Otherwise, a get will return 1 (clear) and a
set will return an error.
cimIpRouteDesKey Allows the user to specify which Encryption Key should be
used to encrypt traffic for a route. This parameter can be one
of three values: clear, key1, or key2. Clear will force the
CiM-300L to not encrypt any traffic processed for the route.
Key1 will use the key specified in the first key to encrypt
traffic for the route. Key2 will use the second key to encrypt
traffic for the route.
Can be set to:
1 Clear
2 Key 1
3 Key 2
4 Random
cimIpRouteRowStatus Used in get operations to tell if the route table entry is active.
It is used in set operations to tell if a new route table entry is
to be created or an existing route table entry is to be deleted.
It returns 1 (active) to indicate that the route entry is available
for use by the managed device. The values of 2
(notInService) and 3 (notReady) are not supported.
When a new route entry is created, this OID must be set to 4
(createAndGo). The value of 5 (createAndWait) is not
supported.
If an existing row is to be deleted this OID must be set to 6
(destroy), which indicates that the user wishing to delete the
route from the route table.
The “cimIpRouteRowStatus” can return:
1 Active
The “cimIpRouteRowStatus” can be set to the following for
row create/delete:
4 Create And Go
6 Destroy
cimIpRoutePriority Specifies the route QoS priority. The priority level can be set
to 1 (high) or 2 (low).