Table 11-38. rx parameters oids, 3 rx p – Comtech EF Data CIM-300L User Manual
Page 279
CiM-300L IP Enabled Satellite Modem
Rev. 1
SNMP
CD/CIM300L.IOM
253
11.5.1.3 RX P
ARAMETERS
Table 11-38. Rx Parameters OIDs
OID Description
cim300LRxFrequency
Receive frequency in Hz. Can be set from 950,000,000 Hz to
1,750,000,000 Hz.
cim300LRxRateSelect
Concatenated string describing the decoder rate and the
data rate in KHz. The decoder can be set to the following
values: 1/2 (QPSK 1/2), 3/4 (QPSK 3/4), 7/8 (QPSK 7/8),
BP12 (BPSK 1/2), 8P23 (8PSK 2/3), OQ12 (OQPSK 1/2),
OQ34 (OQPSK 3/4), and OQ78 (OQPSK 7/8).
cim300LRxDecoderType
Can be set to:
0 Viterbi
1 Turbo
cim300LRxSpecRotation
Can be set to:
0 Normal
1 Inverted
cim300LRxDescrambler
Can be set to:
0 Off
1 On
cim300LRxDifferentialDecoder Can be set to:
0 Off
1 On
cim300LRxSweepCenter
Range is –500,000 Hz to 500,000 Hz.
cim300LRxSweepRange
Range is 0 Hz to 1,000,000 Hz.
cim300LRxSwpReacquisition
Range is 0 seconds to 999 seconds.
cim300LRxRSEnable
Receive Reed Solomon Decoder Enable. It can be set to:
0 Off
1 On
cim300LRxRSInterleave
Receive Reed Solomon Interleave Value. It can be set to:
4 4
8 8
16 16
cim300LRxBPSKBitOrder
Receive BPSK Ordering. It can be set to:
0 Normal
1 Inverted