Comtech EF Data CIM-300L - Manual (Page 278)

CiM-300L IP Enabled Satellite Modem Rev. 1
SNMP CD/CIM300L.IOM
252
11.5.1.2 TX P
ARAMETERS
Table 11-37. Tx Parameters OIDs
OID Description
cim300LTxFrequency
Transmit frequency in Hz. Valid ranges are from
950,000,000 Hz to 1,750,000,000 Hz.
cim300LTxRateSelect Encoder rate and the data rate in KHz. The encoder can be
the following: 1/2 (QPSK 1/2), 3/4 (QPSK 3/4), 7/8 (QPSK
7/8), BP12 (BPSK 1/2), 8P23 (8PSK 2/3), OQ12 (OQPSK
1/2), OQ34 (OQPSK 3/4), and OQ78 (OQPSK 7/8).
cim300LTxEncoderType Can be set to:
0 Viterbi
1 Turbo
cim300LTxSpecRotation Can be set to:
0 Normal
1 Inverted
cim300LTxScarmbler Can be set to:
0 Off
1 On
cim300LTxDifferentialEncoder Can be set to:
0 Off
1 On
cim300LTxPowerLevel Can be set from -400 to 0. The units are 0.1 dBm (-400 = -
40.0 dBm to 0 = 00.0 dBm).
cim300LTxPowerOffset Can be set from –990 dB to 990 in 0.01 dB increments (-990
= -9.90 dB to 990 = 9.90 dB).
cim300LTxCarrierState Can be set to:
0 Off
1 On
cim300LTxRSEnable Reed Solomon Enocoder enable. It can be set to:
0 Off
1 On
cim300LTxRSInterleave Reed Solomon Interleave Value. It can be set to:
4 4
8 8
16 16
cim300LTxBPSKBitOrder Transmit BPSK Data Ordering. It can be set to:
0 Normal
1 Inverted