beautypg.com

End character, 4 end character – Comtech EF Data CIM-300L User Manual

Page 94

background image

CiM-300L IP Enabled Satellite Modem

Rev. 1

Serial Remote Control

CD/CIM300L.IOM

68

>add/?ER4_modem in local mode'cr''lf']

(Modem in local error; send the REM command to go to remote mode.)


>add/?ER5_hard coded parameter'cr''lf']

(Error message indicating that the parameter is hardware dependent and may not

be changed remotely.)

Note: “add” is used to indicate a valid 1 to 3 character device address in the range between 1

and 255.

Example:

Command: <3/REM_

Response: >3/REM_

5.3.4 E

ND

C

HARACTER

Each message is ended with a single character which signals the end of the message:

!

“cr”

Carriage return character for commands

!

“]”

End bracket for responses

See also other documents in the category Comtech EF Data Equipment: