Zilog Z8F0130 - Manual (Page 86)

Using the Integrated Development Environment UM013037-1212
62
Zilog Developer Studio II – Z8 Encore!
User Manual
Enter the appropriate line number in the edit field and click Go To .
Manage Breakpoints
To view, go to, or remove breakpoints, select Manage Breakpoints from the Edit menu.
You can access the dialog box during Debug mode and Edit mode.
The Breakpoints dialog box, shown in Figure 47, lists all existing breakpoints for the cur-
rently loaded project. A check mark in the box to the left of the breakpoint description
indicates that the breakpoint is enabled. The remainder of this section describes the action-
able features of the
Breakpoints dialog.
Go to Code
To move the cursor to a particular breakpoint you have set in a file, highlight the break-
point in the
Breakpoints dialog box and click Go to Code .
Enable All
To make all listed breakpoints active, click Enable All . Individual breakpoints can be
enabled by clicking in the box to the left of the breakpoint description. Enabled break-
points are indicated by a check mark in the box to the left of the breakpoint description.
Figure 46. Go to Line Number Dialog Box
Figure 47. Breakpoints Dialog Box