Figure 60. additional linker directives dialog box – Zilog Z8F0130 User Manual
Page 120

Using the Integrated Development Environment
UM013037-1212
96
Zilog Developer Studio II – Z8 Encore!
User Manual
Even though selecting the
Always Generate from Settings
checkbox causes a new linker
command file to be generated when you build your project, any directives that you have
specified in the
Additional Linker Directives
dialog box are not erased or overridden.
Additional Directives
To specify additional linker directives that are to be added to those that the linker gener-
ates from your settings when the
Always Generate from Settings
button is selected, per-
form the following tasks:
1. Select the
Additional Directives
checkbox.
2. Click
Edit
. The
Additional Linker Directives
dialog box is displayed.
3. Add new directives or edit existing directives.
4. Click
OK
.
You can use the
Additional Directives
checkbox if you must make some modifications or
additions to the settings that are automatically generated from your project settings, but
you still want all of your project settings and newly added project files to take effect auto-
matically on each new build.
Figure 60. Additional Linker Directives Dialog Box
Note:
- Z8F0131 Z8F0230 Z8F0231 Z8F0430 Z8F0431 Z8F043A Z8F0830 Z8F0831 Z8F083A Z8F1232 Z8F1233 Z8F0113 Z8F011A Z8F0123 Z8F012A Z8F0213 Z8F021A Z8F0223 Z8F022A Z8F0411 Z8F0412 Z8F0413 Z8F041A Z8F0421 Z8F0422 Z8F0423 Z8F042A Z8F0811 Z8F0812 Z8F0813 Z8F081A Z8F0821 Z8F0822 Z8F0823 Z8F082A Z8F0880 Z8F1621 Z8F1622 Z8F1680 Z8F1681 Z8F1682 Z8F2421 Z8F2422 Z8F2480 Z8F3221 Z8F3222 Z8F3281 Z8F3282 Z8F4821 Z8F4822 Z8F4823 Z8F6081 Z8F6082 Z8F6421 Z8F6422 Z8F6423 Z8F6481 Z8F6482 Z8FS021A ZMOT1AHH Z8FS040B ZMOT0BHH ZMOT0BSB Z8FMC04 Z8FMC08 Z8FMC16