Zilog Z8F0130 - Manual (Page 144)

Using the Integrated Development Environment UM013037-1212
120
Zilog Developer Studio II – Z8 Encore!
User Manual
5. Click OK . Your new configuration is displayed in the configurations list in the Man-
age Configurations dialog box.
6. Click Close . The new configuration is the current configuration as shown in the
Select Build Configuration drop-down list box on the Build toolbar. Now that you
have created a blank template, you are ready to select the settings for this new config-
uration.
7. From the Project menu, select Settings . The Project Settings dialog box is dis-
played.
8. Select the settings for the new configuration and click OK .
9. From the File menu, select Save All .
To copy the settings from an existing configuration to an existing configuration, perform
the following tasks:
1. From the Build menu, select Manage Configurations . The Manage Configurations
dialog box is displayed.
2. From the Manage Configurations dialog box, click Copy . The Copy Configuration
Settings dialog box is displayed.
Figure 77. Manage Configurations Dialog Box
Figure 78. Copy Configuration Settings Dialog Box