Zilog Z8F0130 - Manual (Page 149)

UM013037-1212 Tools Menu
Zilog Developer Studio II – Z8 Encore!
User Manual
125
Tools Menu
The Tools menu lets you set up the Flash Loader, calculate a file checksum, update the
firmware, and customize of the Z8 Encore! developer’s environment.
The Tools menu features the following options:
•
Flash Loader – see page 125
•
Calculate File Checksum – see page 132
•
Firmware Upgrade (Selected Debug Tool) – see page 133
•
Show CRC – see page 134
•
Customize – see page 134
•
Options – see page 137
Flash Loader
Use the following procedure to program internal Flash for the Z8 Encore!:
The Flash Loader dialog box must be closed and then opened again whenever a new chip
is inserted or the power is cycled on the target board.
1. Ensure that the target board is powered up and the Z8 Encore! target hardware is con-
nected and operating properly.
2. Select Flash Loader from the Tools menu. The Flash Loader connects to the target
and sets up communication. The Flash Loader Processor dialog box is displayed
with the appropriate Flash target options for the selected CPU.
Note: