Zilog Z8F0130 - Manual (Page 136)

Using the Integrated Development Environment UM013037-1212
112
Zilog Developer Studio II – Z8 Encore!
User Manual
2. Select the appropriate clock frequency in the Clock Frequency (MHz) area or enter
the clock frequency in the Other field. For the emulator, this frequency must match
the clock oscillator on Y4. For the development kit, this frequency must match the
clock oscillator on Y1. The emulator clock cannot be supplied from the target applica-
tion board.
The clock frequency value is used even when the Simulator is selected as the debug tool.
The frequency is used when converting clock cycles to elapsed times in seconds, which can
be viewed in the
Debug Clock window when running the simulator.
3. Click OK .
Add
Click Add to display the Create New Target Wizard dialog box.
Enter a unique target name in the Target Name field, select the Place Target File in Proj-
ect Directory checkbox if you want your new target file to be saved in the same directory
as the currently active project, and click Finish .
Figure 68. Create New Target Wizard Dialog Box
Note: