Zilog Z8F0130 - Manual (Page 138)

Using the Integrated Development Environment UM013037-1212
114
Zilog Developer Studio II – Z8 Encore!
User Manual
Delete target_name Target? ”. Click Yes to delete the target or No to cancel the
command.
Debug Tool
Select the appropriate debug tool from the Current drop-down list box.
•
If you select EthernetSmartCable and click Setup in the Debug Tool area, the
Setup Ethernet Smart Cable Communication dialog box is displayed.
If a Windows Security Alert displays the message: “ Do you want to keep blocking
this program? ”, click Unblock .
– Click Refresh to search the network and update the list of available Ethernet
Smart Cables. The number in the
Broadcast Address field is the destination
address to which ZDS sends the scan message to determine which Ethernet Smart
Cables are accessible. The default value of
255.255.255.255 can be used if the
Ethernet Smart Cable is connected to your local network. Other values such as
192.168.1.255 or 192.168.1.50 can be used to direct or focus the search.
ZDS uses the default broadcast address if the Broadcast Address field is empty.
– Select an Ethernet Smart Cable from the list of available Ethernet Smart Cables by
checking the box next to the Smart Cable you want to use. Alternately, select the
Figure 70. Setup Ethernet Smart Cable Communication Dialog Box
Note: